(RBX452) - CASE IH ROUND BALER (11/02-7/05) (14.20) - SLEDGE Case Agriculture

发表于 2022-10-27 03:10:01

0次 0 0

Pos.	Part No	Qty	Parts name	Comments
1.	86620027	[2]	FLANGED BEARING,80.02mm ID x 147.6mm OD x 4mm Thk	NH
2.	412441	[1]	ROLLER BEARING,40mm ID x 80mm OD x 21mm W, Round Bore	PA & Collar
3.	86636673	[1]	HUB	NH
4.	86609436	[1]	FRAME	NH Sledge Superseded by part number: 87352202
5.	9806396	[1]	SUPPORT	NH
6.	86636892	[1]	FLANGE	NH
7.	9808112	[1]	BALL BEARING,34.99mm ID x 71.88mm OD x 25mm W	NH
8.	87025815	[1]	SHIELD	PA
9.	86627050	[1]	ROLL	NH Stripper Superseded by part number: 87390122, 87602972
10.	86609671	[1]	ROLL	NH Pivot Superseded by part number: 87611564
11.	86527218	[1]	CHAIN,378mm L	NH 15"
12.	86614686	[2]	GEAR	NH Roll, 24T Superseded by part number: 87052121
13.	86619670	[1]	SHIELD	NH
14.	9803325	[2]	SUPPORT	NH Dimple Roll
15.	9843939	[1]	CAP	NH
16.	9806931	[1]	IDLER GEAR,17T	NH 17T, Sledge Roll Drive, Includes: Ref. 7, 47 & 48
17.	86637157	[1]	SHIELD	NH
18.	86636786	[1]	HUB	NH LH
19.	87030468	[2]	HUB	PA Superseded by part number: 87398962
20.	86636893	[1]	BUSHING,27.18mm ID x 47.63mm OD x 34mm L	NH
21.	86628107	[1]	SHIELD	NH
22.	86636768	[2]	PLATE	NH
23.	413-616	[1]	BOLT,Hex, 3/8" - 16 x 1", Gr 5	CAS Superseded by part number: 88206, 72187206
24.	413-620	[1]	BOLT,Hex, 3/8" - 16 x 1-1/4", Gr 5	CAS Superseded by part number: 72187207, 88011
25.	614-10030	[4]	BOLT,Hex, M10 x 1.5 x 30mm, Cl 8.8, Full Thd	IH Superseded by part number: 43140
26.	814-10040	[2]	BOLT,Hex, M10 x 1.5 x 40mm, Cl 8.8	CAS Superseded by part number: 120112
27.	614-12030	[5]	BOLT,Hex, M12 x 1.75 x 30mm, Cl 8.8, Full Thd	IH Superseded by part number: 9706687
28.	827-12045	[2]	BOLT,Hex, M12 x 1.75 x 45mm, Cl 10.9, Full Thd	CAS Superseded by part number: 86639031
29.	814-12060	[1]	BOLT,Hex, M12 x 1.75 x 60mm, Cl 8.8	CAS Superseded by part number: 9706693
30.	61-33128	[16]	HEX SOC SCREW,5/16"-18 x 1 3/4"	CAS Superseded by part number: 81972
31.	811-10040	[2]	CARRIAGE BOLT,Sht Sq Nk, M10 x 1.5 x 40mm, Cl 8.8	CAS Superseded by part number: 374892
32.	86516319	[1]	PLOW BOLT,7/16" - 14 x 1 3/4", Gr 5	NH
33.	419-2620	[4]	PLOW BOLT,#3, 3/8" - 16 x 1 1/4", Gr 5	CAS Superseded by part number: 281004
34.	811-12040	[2]	CARRIAGE BOLT,Sht Sq Nk, M12 x 1.75 x 40mm, Cl 8.8	CAS Superseded by part number: 328754
35.	495-21050	[8]	WASHER,7/16"	CAS Superseded by part number: 81541
36.	140046	[7]	BELLEVILLE WASHER,M12 Bolt Size x 27mm OD x 1.8mm Thk	NH
37.	140045	[4]	BELLEVILLE WASHER,M10 Bolt Size x 22mm OD x 1.6mm Thk	NH
38.	492-11038	[4]	LOCK WASHER,3/8"	CAS Superseded by part number: 80680, 72187249
39.	425-106	[4]	NUT,3/8"-16, Cl 5	CAS Superseded by part number: 9628503
40.	825-2410	[2]	FLANGE NUT,M10 x 1.5, Flg, Cl 8	CAS Superseded by part number: 9804278, 87778057
41.	87517	[2]	NUT,7/16"-14, GB	NH Superseded by part number: 280980
42.	9804279	[2]	FLANGE NUT,Hex, M12, Cl 8	NH Superseded by part number: 86512497
43.	100-28283	[1]	SNAP RING,2.812", Int, #283	CAS Superseded by part number: 9824626
44.	86637167	[1]	WASHER,61.2mm ID x 71.8mm OD x 2.7mm Thk	NH
45.	100-11177	[2]	SNAP RING,#177, Ext	CAS Superseded by part number: 168104
47.	9824626	[1]	SNAP RING,2.812", Int, #283	WIN
48.	9824667	[1]	WASHER,60mm ID x 71mm OD x 2.7mm Thk	NH Superseded by part number: 86637167
50.	29684	[2]	WASHER,13.5mm ID x 50.8mm OD x 5.52mm Thk	NH 17/32" ID x 2" OD x 3/16" Thk
55.	86643977	[3]	ANTI-SKID STRIP,4” x 40”, Black	NH Safety Step, 4" x 40"
56.	NSS	[2]	NOT SOLD SEPARAT	CON Bearing
51.	413-728	[1]	BOLT,Hex, 7/16" - 14 x 1-3/4", Gr 5	IH Superseded by part number: 84192879
54.	84251	[2]	LUBE NIPPLE,30 Degree, 1/8" NPT x 2 5/64" lg	GI